ADLINK CM3-BT4, PCI/104
Specification Download

CMx-CM3-BT4, PCI/104

Product Manufacturer - ADLINK

 

The CMx-BTx is a PC/104-based, Single Board Computer (SBC), fully compliant with the PCI-104 Specification, Version 1.1 and partially compliant with the PC/104 Specification, Version 2.6. PC/104 SBCs are very compact and highly integrated computers. This SBC features the 22nm, Intel® Bay Trail SoC. The board provides a DDR3L SO-DIMM socket, a PC/104 connector, a PCI-104 connector, two USB 2.0 ports, one USB 3.0 port, up to two Gigabit Ethernet ports, up to two SATA 3 Gb/s ports, one dedicated HD-Audio panel connector, one VGA port, one LVDS port, up to four COM ports, one mini-PCIe slot (with one USB 2.0 port included). The CMx-BTx can be run with only 5 volts and is capable of running operating systems like DOS, Windows XP/7/8 in either 32-bit or 64-bit configuration, Linux, VxWorks, and others. Another feature included on the board is a fail safe BIOS that enables the user to start the module even if the original BIOS is corrupted.

 

Product Features

 

▶︎ Quad-core Intel® Atom™ Processor System-on-Chip

 

▶︎ Up to 4GB DDR3L at 1333MHz

 

▶︎ Supports VGA and LVDS

 

▶︎ GbE (optional 2x GbE)

 

▶︎ 1x SATA 3Gb/s (optional 2x SATA), 3x USB 2.0,

  8x GPIO

 

▶︎ Extreme Rugged operating temperature:

  -40°C to +85°C

 

▶︎ Supports Smart Embedded Management Agent

  (SEMA) functions

Product Specifications
  • Part number
  • CM3-BT4, PCI/104
Core System
  • CPU
  • Quad-core Intel Atom® Processor SoC Atom™ E3845 (4C), 1.91 GHz, 542/792(Turbo), 10W
    Supports: single, dual or quad Out-of-Order Execution (OOE) processor cores, Intel VT-x, Intel® SSE4.1 and SSE4.2, Intel® 64 architecture, IA 32-bit, PCLMULQDQ Instruction DRNG, Intel® Thermal Monitor (TM1 & TM2)
  • Memory
  • Up to 4GB DDR3L-1066/1333 MHz DDR3L SO-DIMM
  • Embedded BIOS
  • AMI EFI with CMOS backup in 8MB SPI BIOS
  • Cache
  • Primary 32 KiB, 8-way L1 instruction cache and 24 KiB, 6-way L1 write-back data cache
  • Expansion Busses
  • PCI-104
  • SEMA Board Controller
  • Supports: Voltage/Current monitoring, Power Sequencing, Logistics and
    Forensic
    Information, Flat Panel Control, I²C Bus Control, GPIO Control, User Flash,
    Failsafe
    BIOS (dual BIOS), Watchdog Timer and Fan Control
  • Debug Headers
  • 40-pin multipurpose flat cable connector
Audio
  • Chipset
  • Intel® HD Audio integrated in SoC
  • Audio Codec
  • ALC886
Ethernet
  • Intel® MAC/PHY
  • 2x Intel® i210 (MAC/PHY) Ehternet controller
  • Interface
  • 10/100/1000 GbE connection
LPC
  • LPC
  • LPC UART NCT5104D (Nuvoton)
Video
  • GPU Feature Support
  • 7th generation Intel® graphics core architecture with four execution units
    Supports two independent displays 3D graphics hardware acceleration
    Supports for DirectX 11, OCL 1.1, OGL ES Halt/2.0/1.1, OGL 3.2
    Video decode hardware acceleration including support for H.264, MPEG2,
    MVC, VC-1, WMV9 and VP8 formats
    Video encode hardware acceleration including support for H.264, MPEG2 and MVC formats
  • LVDS
  • Single/dual channel 18/24-bit LVDS from eDP
  • VGA
  • Yes
I/O Interfaces
  • USB
  • 3x USB 2.0 (1x on mSATA)
  • SATA
  • 1x SATA 3Gb/s shared with mSATA (optional 2nd SATA 3GB/s port w/o mSATA support)
  • GPIO
  • 8x
  • Serial
  • 2x RS-232/485 (with full handshake) + 2x RS-232/485 (TX,RX,CTS,RTS only)
Power
  • Standard Input
  • ATX = 5V±5% / 5Vsb ±5% or AT = 5V±5%
  • Management
  • ACPI 5.0 compliant
  • Power States
  • C1-C6, S0, S3, S4, S5 (Wake on USB S3/S4, Wake on LAN S3/S4/S5)
  • ECO mode
  • supports deep S5 for power saving
Operation System
  • Standard Support
  • Windows® 7/8 32/64-bit, Linux 32/64-bit
  • Extended Support (BSP)
  • WES7/8, WEC7, Linux, QNX, VxWorks
Mechanical and Environmental
  • Form Factor
  • PC/104 Version 2.6
  • Dimension
  • 90 mm x 96 mm
  • Operating Temperature
  • Standard: 0°C to +60°C
    Extended Temperature: -40°C to 85°C (SKU dependent, by screening)
  • Humidity
  • 5-90% RH operating, non-condensing
    5-95% RH storage (and operating with conformal coating)
  • Shock and Vibration
  • IEC 60068-2-64 and IEC-60068-2-27
    MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A,
    Table 214-I, Condition D
  • HALT
  • Thermal Stress, Vibration Stress, Thermal Shock and Combined Test
Intelligent Middleware SEMA®
  • Intelligent Middleware SEMA®
  • Local management, control of embedded computer systems
    Extended EAPI for monitoring, controlling and analytics applications
    Multiple OS support and across platforms (x86, ARM)

CONTACT US NOW for more information

CONTACT US NOW

CONTACT US NOW
for more information