ICOP VDX-6353RD, PC/104 SBC

VDX-6353RD, PC/104 SBC

Product Manufacturer - ICOP

 

Product Features

 

▶︎ DM&P SoC Vortex86DX- 800MHz

 

▶︎ 256MB / 512MB DDR2 onboard

 

▶︎ 4S/2U/VGA/LCD/LVDS/LAN/LPT/PWM/SPI/16GPIO/

  CF/IDE

 

▶︎ Operation Temperature: -20 ~ +70°C / -40 ~ +85°C

  (Optional)

 

▶︎ Onboard 4MB SPI Flash Disk

 

▶︎ Optional: USB Audio Controller

Product Specifications
  • Part number
  • VDX-6353RD
  • SoC
  • DM&P SoC CPU Vortex86DX- 800MHz
    Real Time Clock with Lithium Battery Backup
  • Cache
  • L1:16K I-Cache, 16K D-Cache L2 Cache 128KB
  • Bus
  • PC/104 standard compliant
  • BIOS
  • AMI BIOS
  • System Memory
  • 256/512MB DDR2 Onboard
  • Watchdog Timer
  • Software programmable from 30.5μ sec.to 512 sec. x 2 sets (Watchdog 1 fully compatible with M6117D)
  • VGA
  • XGI Volari Z9s Chipset
    VGA and TFT/LVDS Flat Panel Interface Support Onboard 32MB VGA Memory, support resolution up to 1280 x 1024, 16M colors
  • LAN
  • Integrated 10/100Mbps Ethernet
  • Audio
  • CM119 USB audio controller (Optional)
  • Flash Disk Support
  • Onboard 4MB SPI Flash Disk
    MSTI EmbedDisk Module (16MB and above)
    Compact Flash Type I/II
    44-pin IDE to Micro SD (Optional)
  • PWM
  • 16~24 Channels
  • I/O Interface
  • Enhanced IDE port (UltraDMA-100/66/33) x1
    RS-232 port x3
    RS-232/422/485 port x1
    USB port (Ver2.0) x2
    Parallel port x1
    16-bit GPIO port x1
    10/100Mbps Ethernet port x1
  • Connectors
  • 2.0mm 44-pin box header for IDE x1
    2.0mm 44-pin box header for LCD x1
    2.0mm 26-pin box header for Printer x1
    2.0mm 20-pin box header for 16-bit GPIO x1
    2.0mm 16-pin header for LVDS x1
    2.0mm 10-pin box header for VGA x1
    2.0mm 10-pin box header for USB x1
    2.0mm 10-pin box header for RS-232 x4
    2.0mm 8-pin header for Ethernet x1
    2.54mm 5-pin box header for Keyboard x1
    2.54mm 5-pin header for Mouse x1
    2.54mm 4-pin header for -5V, -12V +12V, GND x1
    2.54mm 3-pin header for RS-485 x1
    2.54mm 2-pin header for Reset x1
    2.54mm 7-pin header for Redundancy Signal x1 (Optional)
    2.54mm 2-pin header for System-Fail-SW x1 (Optional)
    1.25mm 6-pin wafer for JTAG x1
    1.25mm 4-pin wafer for Line-out/MIC-in x2 (Optional)
  • Power Requirement
  • Single Voltage +5V @ 720mA
  • Weight
  • 90g
  • Board Size
  • 90 x 96mm (3.54 x 3.77 inches)
  • Operating Temperature
  • -20°C ~ +70°C
    -40°C ~ +85°C (Optional)

CONTACT US NOW for more information

CONTACT US NOW

CONTACT US NOW
for more information